W. P. Law, Incorporated - Fluid Handling Professionals
Search Catalog
        
 All Categories    HRS Series Automated with BYV Series Butterfly Valves
All Categories > Actuated Valves > Actuated Butterfly Valves > Electric Actuator > HRS Series Automated with BYV Series Butterfly Valves > Item # HRBYV11040V  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # HRBYV11040V, 4" BYV Series with HRSN2 On/Off Electric Actuator


High performance HRS Series 120VAC electric on/off actuator mounted to a BYV Series Butterfly Valve. Valve has PVC body with PVC disc and EPDM seals.




Specifications  · Sample Specifications - Valve  · Sample Specifications - Actuator  · Typical Applications  · Key Features, Benefits and Advantages  · Options  · Materials

Specifications

Valve Size
4"

Valve Body Material
PVC

Valve Disc Material
PVC

Liner Material
Viton®

ISO 5211 Flange & Drive
F07-D14

Flow Coefficient (Cv)
600

Medium Temperature Range
70 ºF

Pressure Rating at 70°F
10 bar
150 psi

Method of Operation
Actuated

Actuator Type
Electric

Operation
On / Off

Enclosure
NEMA4/4X

Enclosure Material
Aluminum Dry Powder Coated

Standard Voltage
120VAC


Sample Specifications - Valve
All thermoplastic wafer-style butterfly valves shall be manufactured from PVC Type 1, Grade 1 (ASTM D1784, Cell Classification 12454), CPVC(ASTM D1784, Cell Classification 23447) or glass filled Polypropylene (ASTM D4101, Cell Classification 85580). All valve bodies shall containintegral top mounting flange with dimensions and bolt circles conforming to ISO 5211. Bodies shall contain fully-supported flange bolt holes,be one piece construction and meet ANSI B16.10 narrow face-to-face dimensions in all sizes. If LUGGED butterfly valves are required, lugsshall be over-molded, 316 stainless steel and be the full width of the body. Liners shall be EPDM, Viton® or Nitrile. Liner shall be FULL BOOTdesign, and shall be retained in the body via rib and groove engagement. Liner shall serve as primary disc seal and face seals for mating flanges.Secondary upper bearing and lower seal retainer o-ring seals to be EPDM or FPM. Stem shall be 316 stainless steel, non-wetted and providefull engagement over length of disc. Stem shall have position retention design.

All sizes of butterfly valves (2" through 12") shall be pressure-rated for 150 PSI at 70°F non-shock.All butterfly valves shall carry a three-year warranty, and shall be manufactured by Hayward Flow Control products in the USA.


Sample Specifications - Actuator
All Electric actuators shall feature a high efficiency reversing DC Brush-type Class B motor for 12vac/vdc and 24vac/vdc applications, and a split-phase capacitor thermally protected Class F reversing motor for 120V and 230V applications. Actuators shall be supplied with two primary travel-limiting switches and two standard auxiliary independently adjustable volt-free form A switches rated at 250vac 3A for remote indication of end of travel limits. Actuator positioning shall be via field generated on/off control switching supply voltage feeding the actuator.

Actuator gearing shall operate in a permanently lubricated transmission. There shall be no non-metallic gears utilized in the transmission. Enclosure housing shall be grade 383 cast aluminum with tan powder-coating and with type 304SS stainless steel trim. Actuators shall have F05/07 mounting patterns with a 14mm double square female drive socket. Actuators shall provide a bottom-mounted 8mm hex override shaft to allow manual positioning of the actuator upon loss of power. A raised visual position indicator shall provide actuator position information from 360 degrees around the actuator as well as from above the actuator. Actuators shall generate between 310”lbs and 440”lbs continuous torque regardless of supply voltage. The actuator shall be furnished with two (2) ½” EMT polyamide cable glands rated at IP68 protection into the actuator housing.

Enclosure shall be rated to NEMA 4/4X/IP67. Operating temperature range shall be from -22°F to +158°F (-30°C to 70°C). Actuators shall be CSA Certified to CSA 22.2 No. 139-10 and listed to UL439 for Ordinary Location Applications.

All electric actuators 310”lbs ~ 440”lbs shall be Hayward Flow Control HRSN2 Model and shall carry a Global three (3) year warranty.


Typical Applications
  • Water and Wastewater Treatment
  • Aquatic and Animal Life Support Systems
  • Chemical Processing and Handling
  • Marine and Corrosive Environments
  • Mining
  • Metal Plating and Surface Finishing
  • Landfills / Environmental Infrastructure
  • Water / Theme Parks


Key Features, Benefits and Advantages
  • One Piece Body and Disc in PVC, CPVC and GFPP Materials
  • Revolutionary Hand Lever with 19 Lockable Stop Positions and 360° Interlock
  • External Disc Position and Flow Indication
  • Hydro-dynamic Centric Disc Design for Increased Flow Performance
  • Over-Sized Liner Face Maximizes Surface Contact with Flanges
  • EPDM, Viton® or Nitrile Liners
  • 1-Piece 316 Stainless Steel Stem with Threaded Retaining Gland
  • Stem Bearing and Seal Retainer for Absolute Stem Positioning and Sealing
  • ISO 5211 Top Flange and Stem Drive
  • All Sizes Meet ANSI B16.10 / ISO 5752 Narrow Face-to-Face Dimensions


Options
  • Over-Molded or Field Mountable 316 Stainless Steel Lugs
  • Gear Operators
  • Complete Range of Pneumatic or Electric Actuators
  • Stem Extensions
  • 2" Square Operating Nut
  • Chain Operator for Gear Box


Materials
  • PVC per ASTM D1784 Cell Class 12454
  • CPVC per ASTM D1784 Cell Class 23447
  • GFPP per ASTM D4101 Cell Class 85580
  • EPDM, Viton® and Nitrile Liners