Batch CAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
OVERVIEW
The HRSN2 Series are quarter-turn electric industrial service actuators delivering up to 440 lbf-in torque in voltages ranging from 12v up through 230v in on/off or proportional control modes. Other Key Features include:
• Units are equipped with two (2) volt-free Form A Auxiliary switches rated at up to 3A 250vac
• ISO5211 compliant mounting with a double square female drive
• Raised visual position indicator
• Manual override hand wheel is available
as an option on 2B & 2S models • Manual override shaft standard
• NEMA 4X/IP67 compliant
• Two (2) 1/2" EMT entry ports with sealed cable glands
OPTIONS
• Battery Backup
• Supercap Backup
• Local Control Stations
• IP68 Submersion • IP68 Submersion
Unit of Measure

Specifications

DC Voltage

 N/A 24 V

DC Voltage Selection

 N/A 1

Torque Output

 N/A 440 lbf-in

Torque Output_SI

 N/A 50 nm

Motor

 N/A Perm Magnet Brush Type

Motor Power

 N/A 6 W

Motor Class

 N/A B

Current Draw (Start)

 N/A 2.10

Current Draw (Run)

 N/A 1.2

Current Draw (LRA)

 N/A 2.30

Speed (90°) DC

 N/A 10 second

Motor Starts, per hour

 N/A 1200

Duty Cycle

 N/A 75 %

Control

 N/A Proportional

Manual Override

 N/A Bottom 8mm Hex Shaft

Electrical Entry (2)

 N/A 1/2” EMT or Nylon gland

Ambient Operating Range

 N/A -22°F to +158°F (-30°C to +70°C)

Minimum Operating Temperature

 N/A -22 °F

Maximum Operating Temperature

 N/A 158 °F

Humidity Range

 N/A 0-95% RH

Altitude Limit

 N/A 9850 ft

Weight

 N/A 13.8 lb

Dimensional attributes

A

 N/A 7.57 in

D

 N/A 4.51 in

E

 N/A 6.49 in