Print Back
Industrial grade, rack-and-pinion pneumatically actuated PCD or PCS Series actuator mounted to a BYV Series Butterfly Valve. Valve has PVC body with PVC disc and EPDM seals.
Unit of Measure

Specifications

Valve Size

N/A 8"

Valve Body Material

N/A PVC

Valve Disc Material

N/A PVC

Liner Material

N/A Viton®

ISO 5211 Flange & Drive

N/A F10-D17

Flow Coefficient (Cv)

N/A 2500

Medium Temperature Range

N/A 70 ºF

Pressure Rating at 70°F

N/A 10 bar150 psi

Method of Operation

N/A Actuated

Actuator Type

N/A Pneumatic

Operation

N/A Air to Spring Fail Safe Operation

Namur Mounting

N/A Yes

Enclosure Material

N/A Epoxy-Coated Aluminum

Min/Max Air Pressure

N/A 80psi / 120psi

Sample Specifications - Valve

N/A All thermoplastic wafer-style butterfly valves shall be manufactured from PVC Type 1, Grade 1 (ASTM D1784, Cell Classification 12454), CPVC(ASTM D1784, Cell Classification 23447) or glass filled Polypropylene (ASTM D4101, Cell Classification 85580). All valve bodies shall containintegral top mounting flange with dimensions and bolt circles conforming to ISO 5211. Bodies shall contain fully-supported flange bolt holes,be one piece construction and meet ANSI B16.10 narrow face-to-face dimensions in all sizes. If LUGGED butterfly valves are required, lugsshall be over-molded, 316 stainless steel and be the full width of the body. Liners shall be EPDM, Viton® or Nitrile. Liner shall be FULL BOOTdesign, and shall be retained in the body via rib and groove engagement. Liner shall serve as primary disc seal and face seals for mating flanges.Secondary upper bearing and lower seal retainer o-ring seals to be EPDM or FPM. Stem shall be 316 stainless steel, non-wetted and providefull engagement over length of disc. Stem shall have position retention design.

All sizes of butterfly valves (2" through 12") shall be pressure-rated for 150 PSI at 70°F non-shock.All butterfly valves shall carry a three-year warranty, and shall be manufactured by Hayward Flow Control products in the USA.

Sample Specifications - Actuator

N/A All PCS pneumatic actuator housings shall be epoxy-coated aluminum. The actuators shall be quarter-turn, single-acting (air-to-spring, failsafe), rack-and-pinion (4-piston) design. The internal o-rings shall be Nitrile, and the output shaft shall be Steel. The standard “failsafe” position shall be fail-closed, unless otherwise stated. The actuators shall have manual override capability and a position indicator. Integral, adjustable travel stops (set screws) shall be part of the design to allow precision end-of-travel positioning for open and closed positions. The actuators shall be NAMUR-style to accommodate direct mounting of a solenoid (side-mount) and/or position feedback limit switches (top-mount). The bottom of the actuators shall contain an ISO5211 mounting pattern to facilitate universal valve mounting. All external mounting hardware shall be stainless steel. A minimum of 80 PSI shall be provided to these actuators for proper torque performance in the field. A maximum of 120 PSI shall be allowed. For proper actuator sizing (per valve type and size), consult with Hayward Flow Control.

All PCS series actuators shall carry a Global three (3) year warranty, and shall be manufactured by Hayward Flow Control.

Typical Applications

N/A

  • Water and Wastewater Treatment
  • Aquatic and Animal Life Support Systems
  • Chemical Processing and Handling
  • Marine and Corrosive Environments
  • Mining
  • Metal Plating and Surface Finishing
  • Landfills / Environmental Infrastructure
  • Water / Theme Parks

Key Features, Benefits and Advantages

N/A

  • One Piece Body and Disc in PVC, CPVC and GFPP Materials
  • Revolutionary Hand Lever with 19 Lockable Stop Positions and 360° Interlock
  • External Disc Position and Flow Indication
  • Hydro-dynamic Centric Disc Design for Increased Flow Performance
  • Over-Sized Liner Face Maximizes Surface Contact with Flanges
  • EPDM, Viton® or Nitrile Liners
  • 1-Piece 316 Stainless Steel Stem with Threaded Retaining Gland
  • Stem Bearing and Seal Retainer for Absolute Stem Positioning and Sealing
  • ISO 5211 Top Flange and Stem Drive
  • All Sizes Meet ANSI B16.10 / ISO 5752 Narrow Face-to-Face Dimensions

Options

N/A

  • Over-Molded or Field Mountable 316 Stainless Steel Lugs
  • Gear Operators
  • Complete Range of Pneumatic or Electric Actuators
  • Stem Extensions
  • 2" Square Operating Nut
  • Chain Operator for Gear Box

Materials

N/A

  • PVC per ASTM D1784 Cell Class 12454
  • CPVC per ASTM D1784 Cell Class 23447
  • GFPP per ASTM D4101 Cell Class 85580
  • EPDM, Viton® and Nitrile Liners