OVERVIEW
The HZSN1 Series are quarter-turn electric industrial service actuators delivering up to 266 lbf-in torque in voltages ranging from 24v up through 230v in on/off or proportional control modes. Other Key Features include:
• Equipped with two (2) volt-free Form A Auxiliary switches rated at up to 1A 250vac (on/off models only)
• Proportional models have 4-20mA or 2-10vdc feedback output standard
• ISO5211 compliant with an 11mm double square female drive
• Furnished with a 39" (1M) cable to facilitate field connections outside the compact enclosure
• Low profile visual position indicator and three flush mounted LEDs allow at-a-glance position indication
• Manual override lever and 8mm access shaft at the bottom of the actuator housing
• NEMA 4X/IP67 compliant
• PG6 EMT entry port with sealed cable gland

OVERVIEW
The HRSN2 Series are quarter-turn electric industrial service actuators delivering up to 440 lbf-in torque in voltages ranging from 12v up through 230v in on/off or proportional control modes. Other Key Features include:
• Units are equipped with two (2) volt-free Form A Auxiliary switches rated at up to 3A 250vac
• ISO5211 compliant mounting with a double square female drive
• Raised visual position indicator
• Manual override hand wheel is available as an option on 2B & 2S models
• Manual override shaft standard
• NEMA 4X/IP67 compliant
• Two (2) 1/2" EMT entry ports with sealed cable glands
OPTIONS
• Battery Backup
• Supercap Backup
• Local Control Stations
• IP68 Submersion

OVERVIEW
The HRSN3 Series are quarter-turn electric industrial service actuators delivering up to 1770 lbf-in torque in voltages ranging from 12V up through 480/3 in on/off or proportional control modes. Other Key Features include:
• Units are equipped with two (2) volt-free Form A Auxiliary switches rated at up to 10A 250vac
• ISO5211 compliant mounting with double square female drive inserts
• Raised visual position indicator
• Clutch-free manual override handwheel standard
• NEMA 4X/IP67 compliant
• Two (2) 3/4" EMT entry ports with sealed cable glands
OPTIONS
• Torque Switches
• Motor Control Centers
• Local Control Stations
• IP68 Submersion
• Battery Backup
• Supercap Backup
• Interchangeable ISO5211 Flange & Drives

OVERVIEW
The HRSN4 Series are quarter-turn electric industrial service actuators delivering up to 20,350 lbf-in torque in voltages ranging from 12V up through 480/3 in on/off or proportional control modes. Other Key Features include:
• Units are equipped with two (2) volt-free Form A Auxiliary switches rated at up to 10A 250vac
• ISO5211 compliant mounting with double square female drive inserts
• Raised visual position indicator
• Clutch-free manual override handwheel standard
• NEMA 4X/IP67 compliant
• Two (2) 3/4" EMT entry ports with sealed cable glands
OPTIONS
• Torque Switches
• Motor Control Centers
• Local Control Stations
• IP68 Submersion
• Battery Backup
• Supercap Backup
• Interchangeable ISO5211 Flange & Drives

OVERVIEW
The HRSN5 Series are quarter-turn electric industrial service actuators delivering up to 44,250 lbf-in torque in voltages ranging from 120VAC up through 480/3 in on/off or proportional control modes. Other Key Features include:
• Units are equipped with two (2) volt-free Form A Auxiliary switches rated at up to 10A 250vac
• ISO5211 compliant mounting with double square female drive
• Flat visual position indicator
• Clutch-free manual override handwheel standard
• NEMA 4X/IP67 compliant
• Two (2) 3/4" EMT entry ports with sealed cable glands
OPTIONS
• Torque Switches
• Motor Control Centers
• Local Control Stations
• IP68 Submersion
• Battery Backup

OVERVIEW
The HRSN6 Series are quarter-turn electric industrial service actuators delivering up to 71,200 lbf-in torque in voltages ranging from 120VAC up through 480/3 in on/off or proportional control modes. Other Key Features include:
• Units are equipped with two (2) volt-free Form A Auxiliary switches rated at up to 10A 250vac
• ISO5211 compliant mounting with double square female drive
• Flat visual position indicator
• Clutch-free manual override handwheel standard
• NEMA 4X/IP67 compliant
• Two (2) 3/4" EMT entry ports with sealed cable glands
OPTIONS
• Torque Switches
• Motor Control Centers
• Local Control Stations
• IP68 Submersion
• Battery Backup

OVERVIEW
The HRSN7 Series are quarter-turn electric industrial service actuators delivering up to 177,000 lbf-in torque in voltages ranging from 220/3 up through 480/3 in on/off or proportional control modes. Other Key Features include:
• Units are equipped with two (2) volt-free Form A Auxiliary switches rated at up to 10A 250vac
• ISO5211 compliant mounting with double square female drive inserts
• Flat visual position indicator
• Clutch-free manual override handwheel standard
• NEMA 4X/IP67 compliant
• Two (2) 3/4" EMT entry ports with sealed cable glands
OPTIONS
• Torque Switches
• Motor Control Centers
• Local Control Stations
• IP68 Submersion
• Interchangeable ISO5211 Drive Inserts